The F 25 spindle moulder with tilting spindle combines sturdiness, reliability, ergonomics and ease of use
Advantages
Flexibility: Spindle moulder fence with movement by handwheel and mechanical digital readouts. Spindle tiltable +/- 45°. The wide range of options available allow any type of machining.
Sturdiness: Sturdy steel machine structure. Ribbed cast iron worktable which guarantees no vibrations.
STANDARD EQUIPMENT
-
Manual tool-holder shaft raising and inclination, complete with mechanical digital of working height (F 25)
-
Motorised tool-holder shaft raising and inclination, complete with electronic digital of working height (F 25 M)
-
Safety micro-switches on motor access door
-
Emergency pushbutton
-
Padlockable main switch
-
Overload switch protection
-
Direct start main motor
-
Reverse spindle rotation
-
Auxiliary low voltage circuit (110 Volts)
TECHNICAL DATA
Worktable dimensions 1200x810 mm
Useful spindle height ø 30 – 35 - 140 mm
Useful spindle height ø 40 – 50 - 180 mm
MK4 interchangeable spindle (opt) ø 30 – 35 - 140 mm
MK4 interchangeable spindle (opt) ø 40 – 50 - 160 mm
No. 5 spindle rotation speeds 3000/4500/6000/8000/10.000 rpm
Max. tool diameter when profiline 250 mm
Max. diameter of returning tool under worktable 320x60 mm
Exhaust hood on fence diameter 120 mm
No. 2 rear exhaust hood diameter 60 mm
Main motor power (S6) 5 kW 7 HP 50 Hz
MAIN VERSIONS
F 25 M - Motorised spindle moulder with tilting shaft
-
Spindle moulder fence with continuous linear adjustment by handwheel accessible from the front of the machine for:
Adjustment of entire fence with respect to tool diam.
Adjustment of entry fence for thick removal
-
Mechanical readout of the adjustment
-
Wooden tables and connecting bars
-
250 mm max. tool diameter
-
Motorised lifting and tilting
-
Spindle protection for operations (max. tool diam. 160 mm)
-
Safety microswitches on spindle locking
-
Electrical pre-setting for feeder
-
Automatic brake on motor
-
Speed display dial
-
E.C. certificate of conformity
F 25 "LL" version with 2 profiling extensions
-
Total length of table 2500 mm complete with front support bar for large workpieces
-
Emergency pushbutton
F 25 "T" version with lateral tenoning carriage
F 25 "TL" version with lateral tenoning carriage and profiling
OPTIONS
-
Carriage on fixed table for small tenoning operations
-
Spindle moulder fence with adjustment by handwheel
-
Guide support for quick exclusion of the table
-
Aluminium tables instead of wooden tables for fence
-
Spindle rotation speed 1300/3000/4500/6000/9000 rpm
-
MK 4 interchangeable spindle
-
Spare spindle (each)
-
Spare spindle with clamps holding shaft (1/2)
-
Motor 7kW 9,5 Hp 50Hz (8kW 11HP 60Hz) (S6)
CONFIG VER. 1
-
F 25 "TL" version
-
Spindle moulder fence with adjustment by handwheel
-
Carriage on fixed table for small tenoning operations
-
Spindle shaft 35 mm